{"id":894,"date":"2023-10-12T04:20:42","date_gmt":"2023-10-12T04:20:42","guid":{"rendered":"http:\/\/wormgearreduer.top\/china-professional-vertical-slewing-gear-for-single-axis-pv-cpv-tracker-hypoid-bevel-gear\/"},"modified":"2023-10-12T04:20:42","modified_gmt":"2023-10-12T04:20:42","slug":"china-professional-vertical-slewing-gear-for-single-axis-pv-cpv-tracker-hypoid-bevel-gear","status":"publish","type":"post","link":"https:\/\/wormgearreduer.top\/sk\/china-professional-vertical-slewing-gear-for-single-axis-pv-cpv-tracker-hypoid-bevel-gear\/","title":{"rendered":"China Professional Vertical Slewing Gear for Single Axis PV, Cpv Tracker hypoid bevel gear"},"content":{"rendered":"
\n
\n

Popis produktu<\/h2>\n

\n

VH7 for 60-96pcs panels single axis horizontal single axis solar tracking system<\/strong><\/p>\n

It is advised to mount the slewing drives referring to attached drawing upside in solar applications for better protection.For other applications, the mounting directions shall be based on the evaluation of the protection level and it shall be better for better protection.<\/p>\n

It is advised to mount the slewing drives upside down on the azimuth axis in solar applications for better protection and add protection for the elevation axis.For other applications, the mounting directions shall be based on the evaluation of the protection level and it shall be better for better protection.<\/p>\n

For a single-axis tracker, the rotating axis is normally the vertical axis which moves the collector east to west during the day.<\/p>\n

With the rotation on the vertical axis, the collector maintains a constant clearance from the ground. The collector is titled from the ground plane by an amount approximately equal to the latitude, and the collector is turned to the east in the morning and slowly turns to face west in the evening.<\/p>\n

After sunset, active trackers reset to the east to be ready for the following day, but as mentioned previously, passive trackers require sunlight to reset.<\/p>\n

An array of single-axis trackers that are driving flat panels. The vertical axis is the only 1 that tracks.<\/p>\n

\u00a0<\/p>\n\n\n\n\n\n\n\n\n\n
\n

Model<\/p>\n<\/td>\n

\n

VH7<\/p>\n<\/td>\n

\n

IP<\/p>\n<\/td>\n

\n

IP6<\/p>\n<\/td>\n<\/tr>\n

\n

Zna\u010dka<\/p>\n<\/td>\n

\n

Coresun Drive<\/p>\n<\/td>\n

\n

Typ<\/p>\n<\/td>\n

\n

Vertik\u00e1lne<\/p>\n<\/td>\n<\/tr>\n

\n

Materi\u00e1l<\/p>\n<\/td>\n

\n

42CrMo, 50Mn<\/p>\n<\/td>\n

\n

V\u00fdstupn\u00fd kr\u00fatiaci moment<\/p>\n<\/td>\n

\n

6.3KN.m<\/p>\n<\/td>\n<\/tr>\n

\n

Kr\u00fatiaci moment klopenia<\/p>\n<\/td>\n

\n

10KN.m<\/p>\n<\/td>\n

\n

Pr\u00eddr\u017en\u00fd moment<\/p>\n<\/td>\n

\n

45KN.m<\/p>\n<\/td>\n<\/tr>\n

\n

Statick\u00e9 axi\u00e1lne hodnotenie<\/p>\n<\/td>\n

\n

350KN<\/p>\n<\/td>\n

\n

Statick\u00e9 radi\u00e1lne hodnotenie<\/p>\n<\/td>\n

\n

120 kN<\/p>\n<\/td>\n<\/tr>\n

\n

Square Tube<\/p>\n<\/td>\n

92mm<\/td>\n\n

Motor<\/p>\n<\/td>\n

24VDC or 220VAC, 380VAC<\/td>\n<\/tr>\n
\n

Prevodov\u00fd pomer<\/p>\n<\/td>\n

\n

60:1<\/p>\n<\/td>\n

\n

Efekt\u00edvnos\u0165<\/p>\n<\/td>\n

\n

40%<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\u00a0<\/p>\n

\u00a0<\/p>\n

O n\u00e1s<\/strong><\/p>\n

Coreun Drive slewing drive products are high-quality slewing drive products developed with independent technology and technology to meet market needs. CHINAMFG Drive has a full range of mature slewing drive products with multiple specifications and the ability to custom design and manufacture such products for customer needs. For different applications requiring low-speed heavy loads, high-speed medium loads and high-speed light loads, Khanwang can provide corresponding products or solutions.<\/p>\n

Coresun Drive’s worm-gear slewing drive includes 2 categories: cylindrical worms and envelope worms. Cylindrical worms are suitable for medium-speed and heavy-duty applications, and envelope worms are suitable for low-speed, heavy-duty and high-precision applications. The worm-gear slewing drive is self-locking , In the field of power sports, it can provide basic safety guarantee and further simplify the overall design of the equipment. It is a superior industrial accessory.<\/p>\n

Coresun Drive’s enveloping worm rotary drive is entirely derived from its own technology, the processing technology is unique, and the processing process is fully numerically controlled. Therefore, the product quality is extremely controllable, the manufacturing accuracy is far higher than that of similar products, and the performance of the finished product is also Far higher than other similar products. In addition to the final product, the envelope worm and the matching worm gear can be flexibly optimized and configured according to user needs. According to different usage requirements and environments, the Khan King Envelope Worm can be made of a variety of materials and can be subjected to various specific heat treatments to make the product more durable in terms of user needs. For field environments such as solar and wind energy applications that require long-term maintenance-free operation, this type of rotary drive product is the best choice.
\u00a0<\/p>\n

(1) We have first-class testing equipment to detect bearing various data parameters and control the quality of the bearing.<\/p>\n

Whenever\u00a0bearings must first detected whether the quality\u00a0is qualified and the unqualified bearing will be eliminated directly.So we can get the trust of a large customer, and supply them for several years.<\/p>\n

(2) We have our own R & D capabilities, to help customers solve the problem of non-standard bearings.We can also according to customer requirements\u00a0change their own mark.<\/p>\n

(3) price,\u00a0our\u00a0manufacture\u00a0ensure that our prices across China are quite competitive.\u00a0It is better for you to compare prices and quality\u00a0among suppliers.<\/p>\n

\u00a0Advange<\/strong><\/p>\n\n\n\n\n\n\n\n
1.Mainly apply to the relatively high condition for high requirement for dustproof, rain-proof and anti-corrosion occasion.<\/td>\n<\/tr>\n
2.Precision grade IP65<\/td>\n<\/tr>\n
3.Different motors(AC, DC, Hydraulic) can be designed according to customer’s requirement.<\/td>\n<\/tr>\n
4.We can provide different colors for customer<\/td>\n<\/tr>\n
5. We can make a change or design new models for customer<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\u00a0Products Photo<\/strong><\/u><\/p>\n


<\/strong><\/u><\/p>\n

\u00a0<\/p>\n

Products Application<\/u><\/strong><\/p>\n

Coresun Drive slewing drive VH7 is a good solution to 60-96pcs single axis solar tracker design.<\/strong>
The production is widely export to USA,Canada,Germany,Spain,France,Poland,Turkey,Korea,Australia,South Africa,India, Brazil,Chile…<\/strong><\/p>\n

<\/p>\n

Products Certificate<\/u><\/strong><\/p>\n

Our slewing drive gear motor have arroved by CE and ISO2001 certificate.<\/strong><\/p>\n

KONTAKTUJTE N\u00c1S<\/strong><\/u><\/p>\n

\u00daprimne sa te\u0161\u00edme na spolupr\u00e1cu spolo\u010dnosti CHINAMFG s vami a na poskytnutie najkvalitnej\u0161\u00edch produktov a slu\u017eieb z cel\u00e9ho srdca!<\/strong><\/p>\n

\n

\n

\n<\/div>\n
\n\n\n\n\n\n\n\n
Funkcia:<\/th>\nCorrosion-Resistant<\/td>\n<\/tr>\n
Krok:<\/th>\nDvojit\u00fd krok<\/td>\n<\/tr>\n
Openness:<\/th>\nClosed<\/td>\n<\/tr>\n
In\u0161tal\u00e1cia:<\/th>\nVertik\u00e1lne<\/td>\n<\/tr>\n
Transmission Form:<\/th>\n\u010cerv<\/td>\n<\/tr>\n
Typ:<\/th>\nSingle-Row Ball<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
<\/div>\n\n\n\n
Prisp\u00f4sobenie:<\/th>\n\n
\n
\n K dispoz\u00edcii\n <\/div>\n

|<\/span><\/p>\n

<\/i>Prisp\u00f4soben\u00e1 po\u017eiadavka<\/p><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<\/p><\/div>\n<\/table>\n

\"z\u00e1vitovkov\u00fd<\/p>\n

Ak\u00fd vplyv m\u00e1 z\u00e1vitovkov\u00fd prevod na celkov\u00fa \u00fa\u010dinnos\u0165 syst\u00e9mu?<\/h3>\n

Z\u00e1vitovkov\u00fd prevod m\u00e1 v\u010faka svojej jedine\u010dnej kon\u0161trukcii a mechanick\u00fdm vlastnostiam v\u00fdznamn\u00fd vplyv na celkov\u00fa \u00fa\u010dinnos\u0165 syst\u00e9mu. Tu je podrobn\u00e9 vysvetlenie, ako z\u00e1vitovkov\u00fd prevod ovplyv\u0148uje \u00fa\u010dinnos\u0165 syst\u00e9mu:<\/p>\n

Z\u00e1vitovkov\u00fd prevod pozost\u00e1va zo z\u00e1vitovky (skrutkovit\u00e9 ozuben\u00e9 koleso) a z\u00e1vitovkov\u00e9ho kolesa (valcov\u00e9 ozuben\u00e9 koleso so zubami). Ke\u010f sa z\u00e1vitovka ot\u00e1\u010da, zaber\u00e1 so zubami z\u00e1vitovkov\u00e9ho kolesa, \u010do sp\u00f4sobuje ot\u00e1\u010danie kolesa. Hlavn\u00e9 faktory ovplyv\u0148uj\u00face \u00fa\u010dinnos\u0165 z\u00e1vitovkov\u00e9ho prevodov\u00e9ho syst\u00e9mu s\u00fa:<\/p>\n

    \n
  • Prevodov\u00fd pomer:<\/strong> Z\u00e1vitovkov\u00e9 prevody s\u00fa zn\u00e1me svojimi vysok\u00fdmi reduk\u010dn\u00fdmi pomermi, \u010do je pomer po\u010dtu zubov z\u00e1vitov\u00e9ho kolesa k po\u010dtu z\u00e1vitov na z\u00e1vitovke. Tento vysok\u00fd reduk\u010dn\u00fd pomer umo\u017e\u0148uje v\u00fdrazn\u00e9 zn\u00ed\u017eenie r\u00fdchlosti a zn\u00e1sobenie kr\u00fatiaceho momentu. \u010c\u00edm v\u00e4\u010d\u0161\u00ed je v\u0161ak reduk\u010dn\u00fd pomer, t\u00fdm v\u00e4\u010d\u0161ie s\u00fa straty tren\u00edm, \u010do vedie k ni\u017e\u0161ej \u00fa\u010dinnosti.<\/li>\n
  • Mechanick\u00e1 \u00fa\u010dinnos\u0165:<\/strong> Mechanick\u00e1 \u00fa\u010dinnos\u0165 z\u00e1vitovkov\u00e9ho prevodov\u00e9ho syst\u00e9mu sa vz\u0165ahuje na pomer v\u00fdstupn\u00e9ho v\u00fdkonu k vstupn\u00e9mu v\u00fdkonu, pri\u010dom sa zoh\u013ead\u0148uj\u00fa straty sp\u00f4soben\u00e9 tren\u00edm a neefekt\u00edvnos\u0165 prenosu v\u00fdkonu. Z\u00e1vitovkov\u00e9 prevody maj\u00fa zvy\u010dajne ni\u017e\u0161iu mechanick\u00fa \u00fa\u010dinnos\u0165 v porovnan\u00ed s in\u00fdmi typmi prevodov, predov\u0161etk\u00fdm kv\u00f4li klzn\u00e9mu p\u00f4sobeniu medzi z\u00e1vitovkou a zubami z\u00e1vitovkov\u00e9ho kolesa. Tento klzn\u00fd kontakt generuje vy\u0161\u0161ie straty tren\u00edm, \u010do vedie k zn\u00ed\u017eeniu \u00fa\u010dinnosti.<\/li>\n
  • Samosvorn\u00e9:<\/strong> Jednou z v\u00fdhodn\u00fdch vlastnost\u00ed z\u00e1vitovkov\u00fdch prevodov je ich samosvorn\u00e1 schopnos\u0165. V\u010faka uhlu z\u00e1vitu z\u00e1vitovky dok\u00e1\u017ee z\u00e1vitovkov\u00fd prevodov\u00fd syst\u00e9m zabr\u00e1ni\u0165 sp\u00e4tn\u00e9mu ot\u00e1\u010daniu v\u00fdstupn\u00e9ho hriade\u013ea bez potreby dodato\u010dn\u00fdch brzdov\u00fdch mechanizmov. Hoci je samosvorn\u00fd mechanizmus prospe\u0161n\u00fd pre udr\u017eanie polohy a zabr\u00e1nenie sp\u00e4tn\u00e9mu pohybu, zvy\u0161uje aj straty tren\u00edm a zni\u017euje \u00fa\u010dinnos\u0165, ke\u010f je potrebn\u00e9 prevodov\u00fd syst\u00e9m poh\u00e1\u0148a\u0165 v opa\u010dnom smere.<\/li>\n
  • Mazanie:<\/strong> Spr\u00e1vne mazanie je k\u013e\u00fa\u010dov\u00e9 pre minimaliz\u00e1ciu trenia a udr\u017eanie efekt\u00edvnej prev\u00e1dzky z\u00e1vitovkov\u00e9ho prevodov\u00e9ho syst\u00e9mu. Nedostato\u010dn\u00e9 alebo nespr\u00e1vne mazanie m\u00f4\u017ee vies\u0165 k zv\u00fd\u0161en\u00e9mu treniu a opotrebovaniu, \u010do m\u00e1 za n\u00e1sledok ni\u017e\u0161iu \u00fa\u010dinnos\u0165. Pravideln\u00e1 \u00fadr\u017eba mazania vr\u00e1tane monitorovania viskozity, \u010distoty a stavu maziva je nevyhnutn\u00e1 pre optimaliz\u00e1ciu \u00fa\u010dinnosti a zn\u00ed\u017eenie str\u00e1t v\u00fdkonu.<\/li>\n
  • Kvalita dizajnu a v\u00fdroby:<\/strong> Kvalita n\u00e1vrhu a v\u00fdroby komponentov z\u00e1vitovkov\u00e9ho prevodu zohr\u00e1va v\u00fdznamn\u00fa \u00falohu pri ur\u010dovan\u00ed \u00fa\u010dinnosti syst\u00e9mu. Presn\u00e9 obr\u00e1banie, presn\u00e9 profily zubov, spr\u00e1vny z\u00e1ber ozuben\u00fdch kolies a vhodn\u00e9 povrchov\u00e9 \u00fapravy prispievaj\u00fa k zn\u00ed\u017eeniu trenia a zv\u00fd\u0161eniu \u00fa\u010dinnosti. Vysokokvalitn\u00e9 materi\u00e1ly s vhodnou tvrdos\u0165ou a hladkos\u0165ou tie\u017e ovplyv\u0148uj\u00fa celkov\u00fa \u00fa\u010dinnos\u0165 syst\u00e9mu.<\/li>\n
  • Prev\u00e1dzkov\u00e9 podmienky:<\/strong> Prev\u00e1dzkov\u00e9 podmienky, ako je aplikovan\u00e9 za\u0165a\u017eenie, r\u00fdchlos\u0165 ot\u00e1\u010dania a teplota, m\u00f4\u017eu ovplyvni\u0165 \u00fa\u010dinnos\u0165 z\u00e1vitovkov\u00e9ho prevodov\u00e9ho syst\u00e9mu. Vy\u0161\u0161ie za\u0165a\u017eenie, r\u00fdchlej\u0161ie r\u00fdchlosti a extr\u00e9mne teploty m\u00f4\u017eu zv\u00fd\u0161i\u0165 straty tren\u00edm a zn\u00ed\u017ei\u0165 celkov\u00fa \u00fa\u010dinnos\u0165. Spr\u00e1vny v\u00fdber z\u00e1vitovkov\u00e9ho prevodov\u00e9ho syst\u00e9mu na z\u00e1klade o\u010dak\u00e1van\u00fdch prev\u00e1dzkov\u00fdch podmienok je rozhoduj\u00faci pre optimaliz\u00e1ciu \u00fa\u010dinnosti.<\/li>\n<\/ul>\n

    Je d\u00f4le\u017eit\u00e9 poznamena\u0165, \u017ee hoci z\u00e1vitovkov\u00e9 prevody m\u00f4\u017eu ma\u0165 v porovnan\u00ed s niektor\u00fdmi in\u00fdmi typmi prevodov ni\u017e\u0161iu mechanick\u00fa \u00fa\u010dinnos\u0165, pon\u00fakaj\u00fa jedine\u010dn\u00e9 v\u00fdhody, ako s\u00fa vysok\u00e9 reduk\u010dn\u00e9 pomery, kompaktn\u00e1 kon\u0161trukcia a samosvorn\u00e9 schopnosti. Vhodnos\u0165 z\u00e1vitovkov\u00e9ho prevodov\u00e9ho syst\u00e9mu z\u00e1vis\u00ed od \u0161pecifick\u00fdch po\u017eiadaviek aplik\u00e1cie a kompromisov medzi \u00fa\u010dinnos\u0165ou, prenosom kr\u00fatiaceho momentu a \u010fal\u0161\u00edmi faktormi.<\/p>\n

    Pri navrhovan\u00ed alebo v\u00fdbere z\u00e1vitovkov\u00e9ho prevodov\u00e9ho syst\u00e9mu je nevyhnutn\u00e9 zv\u00e1\u017ei\u0165 po\u017eadovan\u00fa rovnov\u00e1hu medzi \u00fa\u010dinnos\u0165ou, po\u017eiadavkami na kr\u00fatiaci moment, polohovou stabilitou a \u010fal\u0161\u00edmi v\u00fdkonnostn\u00fdmi faktormi, aby sa zabezpe\u010dila optim\u00e1lna celkov\u00e1 \u00fa\u010dinnos\u0165 syst\u00e9mu.<\/p>\n

    \"z\u00e1vitovkov\u00fd<\/p>\n

    M\u00f4\u017eu sa z\u00e1vitovkov\u00e9 prevody pou\u017ei\u0165 v horizont\u00e1lnej aj vertik\u00e1lnej orient\u00e1cii?<\/h3>\n

    \u00c1no, z\u00e1vitovkov\u00e9 prevody sa daj\u00fa pou\u017ei\u0165 v horizont\u00e1lnej aj vertik\u00e1lnej orient\u00e1cii. Tu je podrobn\u00e9 vysvetlenie vhodnosti z\u00e1vitovkov\u00fdch prevodov pre r\u00f4zne orient\u00e1cie:<\/p>\n

    1. Horizont\u00e1lna orient\u00e1cia:<\/strong> Z\u00e1vitovkov\u00e9 prevody sa be\u017ene pou\u017e\u00edvaj\u00fa v horizont\u00e1lnej orient\u00e1cii a s\u00fa pre tak\u00e9to aplik\u00e1cie ve\u013emi vhodn\u00e9. V horizont\u00e1lnej konfigur\u00e1cii je hmotnos\u0165 z\u00e1vitovkov\u00e9ho prevodu prim\u00e1rne podopret\u00e1 lo\u017eiskami a puzdrom. Mazacie a nosn\u00e9 schopnosti kon\u0161trukcie prevodu s\u00fa optimalizovan\u00e9 pre horizont\u00e1lnu prev\u00e1dzku, \u010do umo\u017e\u0148uje efekt\u00edvny prenos v\u00fdkonu a generovanie kr\u00fatiaceho momentu. Medzi aplik\u00e1cie horizont\u00e1lnych z\u00e1vitovkov\u00fdch prevodov patria dopravn\u00edkov\u00e9 syst\u00e9my, mie\u0161a\u010dky, mlyny a mnoho \u010fal\u0161\u00edch priemyseln\u00fdch strojov.<\/p>\n

    2. Vertik\u00e1lna orient\u00e1cia:<\/strong> Z\u00e1vitovkov\u00e9 prevody sa m\u00f4\u017eu pou\u017e\u00edva\u0165 aj vo vertik\u00e1lnej orient\u00e1cii, hoci v tak\u00fdchto pr\u00edpadoch je potrebn\u00e9 zv\u00e1\u017ei\u0165 nieko\u013eko \u010fal\u0161\u00edch faktorov. Vo vertik\u00e1lnej konfigur\u00e1cii vyv\u00edja hmotnos\u0165 z\u00e1vitovkov\u00e9ho prevodu axi\u00e1lnu silu na z\u00e1vitovkov\u00fd hriade\u013e, \u010do m\u00f4\u017ee sp\u00f4sobi\u0165 dodato\u010dn\u00e9 za\u0165a\u017eenie a ovplyvni\u0165 v\u00fdkon prevodu. Pre zabezpe\u010denie spr\u00e1vnej prev\u00e1dzky vo vertik\u00e1lnej orient\u00e1cii je potrebn\u00e9 zv\u00e1\u017ei\u0165 nasleduj\u00face faktory:<\/p>\n

      \n
    • Manipul\u00e1cia s axi\u00e1lnym za\u0165a\u017een\u00edm:<\/strong> Vertik\u00e1lne orient\u00e1cie klad\u00fa na z\u00e1vitovkov\u00e9 koleso axi\u00e1lne za\u0165a\u017eenie v d\u00f4sledku hmotnosti ozuben\u00e9ho kolesa a ak\u00e9hoko\u013evek dodato\u010dn\u00e9ho vonkaj\u0161ieho za\u0165a\u017eenia. Kon\u0161trukcia ozuben\u00e9ho kolesa by mala by\u0165 schopn\u00e1 zvl\u00e1dnu\u0165 a pren\u00e1\u0161a\u0165 toto axi\u00e1lne za\u0165a\u017eenie bez nadmern\u00e9ho opotrebenia alebo deform\u00e1cie. Spr\u00e1vny v\u00fdber lo\u017eiska a mazanie s\u00fa k\u013e\u00fa\u010dov\u00e9 pre podopretie axi\u00e1lneho za\u0165a\u017eenia a udr\u017eanie optim\u00e1lneho v\u00fdkonu.<\/li>\n
    • Mazanie:<\/strong> Mazanie sa st\u00e1va e\u0161te d\u00f4le\u017eitej\u0161\u00edm v aplik\u00e1ci\u00e1ch vertik\u00e1lnych z\u00e1vitovkov\u00fdch prevodov. Dostato\u010dn\u00e9 mazanie zabezpe\u010duje spr\u00e1vnu tvorbu mazacieho filmu, aby sa minimalizovalo trenie, zn\u00ed\u017eilo opotrebenie a rozpty\u013eovalo teplo generovan\u00e9 po\u010das prev\u00e1dzky. Aby sa zabezpe\u010dilo \u00fa\u010dinn\u00e9 mazanie, najm\u00e4 v horn\u00fdch \u010dastiach prevodu, kde m\u00f4\u017ee by\u0165 rozlo\u017eenie maziva n\u00e1ro\u010dnej\u0161ie, je potrebn\u00e9 starostlivo zv\u00e1\u017ei\u0165 typ maziva, viskozitu a sp\u00f4sob mazania.<\/li>\n
    • Kontrola sp\u00e4tn\u00e9ho r\u00e1zu:<\/strong> Pri vertik\u00e1lnej orient\u00e1cii m\u00f4\u017ee gravit\u00e1cia sp\u00f4sobi\u0165, \u017ee za\u0165a\u017eenie p\u00f4sob\u00ed na ozuben\u00e9 koleso v opa\u010dnom smere, \u010do m\u00f4\u017ee vies\u0165 k zv\u00fd\u0161enej v\u00f4li. Spr\u00e1vna kon\u0161trukcia ozuben\u00e9ho kolesa vr\u00e1tane geometrie zubov a nastavenia v\u00f4le m\u00f4\u017ee pom\u00f4c\u0165 minimalizova\u0165 v\u00f4\u013eu a zabezpe\u010di\u0165 presn\u00e9 riadenie pohybu a polohov\u00fa stabilitu.<\/li>\n
    • V\u00fdber lo\u017eiska:<\/strong> V\u00fdber lo\u017e\u00edsk je v aplik\u00e1ci\u00e1ch so zvisl\u00fdmi z\u00e1vitovkov\u00fdmi prevodmi k\u013e\u00fa\u010dov\u00fd. Na efekt\u00edvne zvl\u00e1dnutie axi\u00e1lneho a radi\u00e1lneho za\u0165a\u017eenia m\u00f4\u017eu by\u0165 potrebn\u00e9 axi\u00e1lne lo\u017eisk\u00e1 alebo kombin\u00e1cie axi\u00e1lnych a radi\u00e1lnych lo\u017e\u00edsk. Lo\u017eisk\u00e1 s vhodnou \u00fanosnos\u0165ou a tuhos\u0165ou sa vyberaj\u00fa tak, aby sa zabezpe\u010dila plynul\u00e1 prev\u00e1dzka a minimalizovalo sa priehyb pri zvislom za\u0165a\u017een\u00ed.<\/li>\n
    • Tesnenie:<\/strong> Vertik\u00e1lne orient\u00e1cie m\u00f4\u017eu vy\u017eadova\u0165 dodato\u010dn\u00e9 tesniace opatrenia, aby sa zabr\u00e1nilo \u00faniku maziva a vniknutiu ne\u010dist\u00f4t. Na zachovanie integrity prevodov\u00e9ho syst\u00e9mu a zabezpe\u010denie spo\u013eahlivej prev\u00e1dzky by sa mali pou\u017ei\u0165 vhodn\u00e9 tesniace a ochrann\u00e9 mechanizmy, ako s\u00fa upch\u00e1vky alebo tesnenia.<\/li>\n<\/ul>\n

      Stru\u010dne povedan\u00e9, z\u00e1vitovkov\u00e9 prevody sa daj\u00fa pou\u017ei\u0165 v horizont\u00e1lnej aj vertik\u00e1lnej polohe. Pri vertik\u00e1lnych aplik\u00e1ci\u00e1ch by sa v\u0161ak mali zoh\u013eadni\u0165 ur\u010dit\u00e9 aspekty t\u00fdkaj\u00face sa manipul\u00e1cie s axi\u00e1lnym za\u0165a\u017een\u00edm, mazania, regul\u00e1cie v\u00f4le, v\u00fdberu lo\u017eiska a tesnenia. Vhodn\u00fdm rie\u0161en\u00edm t\u00fdchto faktorov m\u00f4\u017eu z\u00e1vitovkov\u00e9 prevody efekt\u00edvne pren\u00e1\u0161a\u0165 v\u00fdkon a kr\u00fatiaci moment, \u010di u\u017e v horizont\u00e1lnej alebo vertik\u00e1lnej polohe.<\/p>\n

      \"z\u00e1vitovkov\u00fd<\/p>\n

      Viete vysvetli\u0165 koncept z\u00e1vitovky a z\u00e1vitovkov\u00e9ho kolesa v z\u00e1vitovkovom prevode?<\/h3>\n

      V z\u00e1vitovkovom prevodovom syst\u00e9me s\u00fa z\u00e1vitovka a z\u00e1vitovkov\u00e9 koleso dva hlavn\u00e9 komponenty, ktor\u00e9 spolo\u010dne pren\u00e1\u0161aj\u00fa pohyb a v\u00fdkon. Tu je vysvetlenie tohto konceptu:<\/p>\n

      \u010cerv:<\/h4>\n

      Z\u00e1vitovka je valcov\u00fd hriade\u013e s omotan\u00fdm \u0161pir\u00e1lov\u00fdm z\u00e1vitom. Pripom\u00edna skrutku so \u0161pir\u00e1lovou dr\u00e1\u017ekou. \u0160pir\u00e1lovit\u00fd z\u00e1vit sa naz\u00fdva z\u00e1vitovka alebo z\u00e1vitovka. Z\u00e1vitovka je hnacou s\u00fa\u010das\u0165ou z\u00e1vitovkov\u00e9ho prevodov\u00e9ho syst\u00e9mu.<\/p>\n

      Ke\u010f sa z\u00e1vitovka ot\u00e1\u010da, \u0161pir\u00e1lov\u00fd z\u00e1vit zaber\u00e1 so zubami z\u00e1vitovkov\u00e9ho kolesa, \u010do sp\u00f4sobuje ot\u00e1\u010danie z\u00e1vitovkov\u00e9ho kolesa. Uhol \u0161pir\u00e1lov\u00e9ho z\u00e1vitu vytv\u00e1ra klinov\u00fd \u00fa\u010dinok proti zubom z\u00e1vitovkov\u00e9ho kolesa, \u010do vedie k vysok\u00e9mu reduk\u010dn\u00e9mu pomeru prevodov\u00e9ho stup\u0148a.<\/p>\n

      Jednou z d\u00f4le\u017eit\u00fdch charakterist\u00edk z\u00e1vitovky je jej samosvorn\u00e1 funkcia. V\u010faka uhlu \u0161pir\u00e1lov\u00e9ho z\u00e1vitu m\u00f4\u017ee z\u00e1vitovka poh\u00e1\u0148a\u0165 z\u00e1vitovkov\u00e9 koleso, ale naopak to neplat\u00ed. Samosvorn\u00e1 funkcia zabra\u0148uje sp\u00e4tn\u00e9mu pohybu z\u00e1vitovky z\u00e1vitovkou, \u010d\u00edm sa v syst\u00e9me vytv\u00e1ra mechanick\u00e1 brzda alebo zadr\u017eiavacia poloha.<\/p>\n

      Z\u00e1vitovka m\u00f4\u017ee by\u0165 vyroben\u00e1 z r\u00f4znych materi\u00e1lov, ako je oce\u013e, bronz alebo dokonca plast, v z\u00e1vislosti od po\u017eiadaviek aplik\u00e1cie. \u010casto je namontovan\u00e1 na hriadeli a podopret\u00e1 lo\u017eiskami pre plynul\u00e9 ot\u00e1\u010danie.<\/p>\n

      Z\u00e1vitovkov\u00e9 koleso:<\/h4>\n

      Z\u00e1vitovkov\u00e9 koleso, tie\u017e zn\u00e1me ako z\u00e1vitovkov\u00e9 koleso, je poh\u00e1\u0148anou s\u00fa\u010das\u0165ou z\u00e1vitovkov\u00e9ho prevodov\u00e9ho syst\u00e9mu. Je to ozuben\u00e9 koleso so zubami, ktor\u00e9 zaberaj\u00fa so \u0161pir\u00e1lov\u00fdm z\u00e1vitom z\u00e1vitovky. Zuby na z\u00e1vitovkovom kolese s\u00fa zvy\u010dajne \u0161pir\u00e1lov\u00e9 a rezan\u00e9 tak, aby zodpovedali uhlu a st\u00fapaniu z\u00e1vitu z\u00e1vitovky.<\/p>\n

      Ke\u010f sa z\u00e1vitovka ot\u00e1\u010da, jej \u0161pir\u00e1lov\u00fd z\u00e1vit zaber\u00e1 so zubami z\u00e1vitovkov\u00e9ho kolesa, \u010do sp\u00f4sobuje ot\u00e1\u010danie z\u00e1vitovkov\u00e9ho kolesa. Ot\u00e1\u010danie z\u00e1vitovkov\u00e9ho kolesa je v rovnakom smere ako ot\u00e1\u010danie z\u00e1vitovky, ale r\u00fdchlos\u0165 je v\u00fdrazne zn\u00ed\u017een\u00e1 v\u010faka vysok\u00e9mu prevodov\u00e9mu pomeru z\u00e1vitovkov\u00e9ho prevodov\u00e9ho syst\u00e9mu.<\/p>\n

      Z\u00e1vitovkov\u00e9 koleso m\u00e1 zvy\u010dajne v\u00e4\u010d\u0161\u00ed priemer v porovnan\u00ed so z\u00e1vitovkou, \u010do umo\u017e\u0148uje vy\u0161\u0161\u00ed reduk\u010dn\u00fd pomer. M\u00f4\u017ee by\u0165 vyroben\u00e9 z materi\u00e1lov ako oce\u013e, bronz alebo liatina, v z\u00e1vislosti od po\u017eiadaviek aplik\u00e1cie na kr\u00fatiaci moment a odolnos\u0165.<\/p>\n

      Z\u00e1vitovka a z\u00e1vitovkov\u00e9 koleso spolu tvoria kompaktn\u00fd a efekt\u00edvny prevodov\u00fd syst\u00e9m, ktor\u00fd poskytuje vysok\u00fa redukciu prevodov\u00fdch stup\u0148ov a samosvorn\u00e9 schopnosti. Be\u017ene sa pou\u017e\u00edvaj\u00fa v r\u00f4znych aplik\u00e1ci\u00e1ch, kde sa vy\u017eaduje presn\u00e9 riadenie pohybu, vysok\u00fd kr\u00fatiaci moment a kompaktnos\u0165, ako s\u00fa napr\u00edklad v\u00fd\u0165ahy, riadiace syst\u00e9my a obr\u00e1bacie stroje.<\/p>\n

      \"China\"China
      editor by CX 2023-10-12<\/p>","protected":false},"excerpt":{"rendered":"

      Product Description VH7 for 60-96pcs panels single axis horizontal single axis solar tracking system It is advised to mount the slewing drives referring to attached drawing upside in solar applications for better protection.For other applications, the mounting directions shall be based on the evaluation of the protection level and it shall be better for better […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[],"class_list":["post-894","post","type-post","status-publish","format-standard","hentry","category-product-catalog"],"_links":{"self":[{"href":"https:\/\/wormgearreduer.top\/sk\/wp-json\/wp\/v2\/posts\/894","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wormgearreduer.top\/sk\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wormgearreduer.top\/sk\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/wormgearreduer.top\/sk\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/wormgearreduer.top\/sk\/wp-json\/wp\/v2\/comments?post=894"}],"version-history":[{"count":0,"href":"https:\/\/wormgearreduer.top\/sk\/wp-json\/wp\/v2\/posts\/894\/revisions"}],"wp:attachment":[{"href":"https:\/\/wormgearreduer.top\/sk\/wp-json\/wp\/v2\/media?parent=894"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wormgearreduer.top\/sk\/wp-json\/wp\/v2\/categories?post=894"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wormgearreduer.top\/sk\/wp-json\/wp\/v2\/tags?post=894"}],"curies":[{"name":"pracovn\u00fd list","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}